Fast, licensed cleanup for fire sprinkler and suppression water damage
Water damage remediation after fire Palm Bay FL
When a kitchen fire gets knocked down, the water left behind keeps causing damage. Our water damage remediation after fire Palm Bay FL crews extract standing water, dry structural cavities, and stop mold before it starts. We handle fire water damage restoration in Palm Bay for homeowners, landlords, and property managers across Brevard County. Call (321) 768-3296 and we roll a truck today.
Live phone supportUpfront optionsBacked workmanship
What's included
What our water damage remediation after fire includes
Every fire water job is different, but the core scope is consistent. Here is what is included when you hire us for water damage remediation after fire Palm Bay FL. Anything beyond this scope, like full reconstruction or asbestos testing, is quoted separately after inspection.
Emergency water extraction
We pull standing water from flooring, carpet, and low spots using truck-mounted and portable extraction units. This happens the same day you call, including nights and weekends.
Structural drying setup
Air movers and commercial dehumidifiers are placed to dry wall cavities, subflooring, and insulation. We monitor with a hygrometer and moisture meter every 24 hours until dry standard is reached.
Antimicrobial treatment
We apply antimicrobial solution to all affected surfaces to stop mold and bacteria growth. This is standard on every fire water job because suppression water is never clean.
Moisture mapping and documentation
You get a written drying report with moisture readings, thermal images, and photos of removed materials. This is the documentation your insurance adjuster needs to approve the claim.
Debris removal
We remove ruined drywall, insulation, baseboards, and subflooring sections. Materials are bagged and hauled away, leaving the space ready for your rebuild contractor.
Service overview
What water damage remediation after fire Palm Bay FL involves
Water damage remediation after fire Palm Bay FL is the specialized cleanup that removes suppression water, extinguisher residue, and smoke-borne moisture from a home after a fire. Firefighting puts 300 to 1,200 gallons into a typical Palm Bay house in minutes. That water soaks drywall, insulation, subflooring, and baseboards, then wicks into wall cavities where a moisture meter reads 28% to 40% when it should read 10% to 12%. We extract it, dry it, and verify it with calibrated instruments before any rebuild starts.
Palm Bay homes built in the 1980s and 1990s around Port Malabar and Lockmar often have cast-iron drains and older supply lines that fail during the heat of a fire. A burst pipe or slab leak can add clean water on top of dirty suppression runoff, and that mix feeds mold in 24 to 48 hours. If you need water damage remediation after fire near me Palm Bay FL 24/7, our team answers around the clock and treats every call as an emergency, not a next-week appointment.
How we workWe verify the cause, compare realistic options, and confirm the repair before we leave.
The service timeline
Our water damage remediation after fire process
The process flexes to the condition, but these checkpoints keep decisions clear.
Emergency call
You call (321) 768-3296 and describe the fire and the water. We ask about the room, the water source, and whether the power is safe. A crew is dispatched with extraction and drying equipment loaded. In most Palm Bay neighborhoods we are on site within 60 to 90 minutes.
Inspection and scope
We walk the house with a moisture meter, thermal imaging camera, and bore scope camera. We map every wet wall, ceiling, and floor. You get a written scope the same day, with photos, that you can hand straight to your insurance adjuster.
Water extraction
Our water extraction unit pulls standing water from flooring, carpet, and low spots. We use a Shop-Vac and Bissell-style extractors for tight corners and cabinets. This step takes two to four hours on a typical 1,200-square-foot affected area.
Structural drying
We set air movers and dehumidifiers to dry wall cavities, subflooring, and insulation. A hygrometer and moisture meter check readings every 24 hours. Most Palm Bay jobs reach dry standard in three to five days, depending on humidity and how long the water sat.
Final verification
We confirm moisture content is back to 10% to 12% in wood and below 15% in drywall. We apply antimicrobial solution, HEPA vacuum the space, and give you a drying report. That report is your proof the home is ready for drywall, paint, and baseboards.
Tools & methods
Tools and methods we use
Purpose-built equipment, used by trained technicians, so the job is done accurately the first time.
Moisture meter and hygrometer
We use these to measure moisture content in drywall, wood, and subflooring. Readings below 15% in drywall and 10% to 12% in wood confirm the structure is dry.
Thermal imaging camera
This camera shows temperature differences that reveal hidden moisture behind walls and ceilings without tearing them open. It is how we find water you cannot see.
Air mover and dehumidifier
Air movers circulate air across wet surfaces while dehumidifiers pull moisture from the air. We use Dri-Eaz and Phoenix Restoration Equipment units for commercial-grade drying.
Water extraction unit
Truck-mounted and portable extraction units pull standing water from carpet, hardwood, and low spots. This is the fastest way to remove hundreds of gallons.
Bore scope camera
We use this to inspect inside wall cavities and crawl spaces without demolition. It helps us find mold growth and hidden water pockets.
HEPA vacuum and negative air machine
These keep soot, ash, and mold spores out of the air during cleanup. Negative air pressure contains particles in the work zone so the rest of your home stays clean.
Ozone generator
After drying, we use an ozone generator to neutralize smoke and fire odors that linger in porous materials. It is the final step before rebuild.
Use cases
When to call for water damage remediation after fire
These examples show how the service framework adapts rather than forcing every call through one repair.
Sprinkler flood in a Port Malabar two-story
A fire sprinkler activated in an upstairs bedroom and ran for 15 minutes before the fire department shut it off. Water soaked the carpet, pad, and ceiling below. The downstairs hallway ceiling showed water stains and moisture readings of 40%. → We pulled the carpet and pad, extracted water from the subfloor, and opened the downstairs ceiling. After five days of drying with air movers and a desiccant dehumidifier, all readings were below 12%. The structure was ready for drywall and paint.
Garage fire and burst pipe in Lockmar
A garage fire melted a supply line, sending water into the utility room and hallway. The water sat for two days before the homeowner returned from a trip. Mold was starting behind the baseboards, and moisture readings were 30% in the drywall. → We extracted the water, removed contaminated baseboards, and applied antimicrobial solution. A bore scope camera confirmed mold growth, which we treated with mold remediation chemicals. After six days, the space was dry and mold-free, with documentation for the insurance claim.
Problems we solve
Problems we solve after fire water damage in Palm Bay
Fire water creates problems that do not show up on day one. Here are the ones we see most often in Palm Bay and how we handle them.
Hidden moisture behind walls and ceilings
We use a thermal imaging camera and moisture meter to map every wet cavity, then dry it with air movers and dehumidifiers. We verify with a hygrometer before closing anything up.
Sewage backup mixed with suppression water
We follow full sewage cleanup protocol with PPE, antimicrobial solution, and negative air pressure. Contaminated materials are bagged and disposed of according to Florida guidelines.
Mold growth in crawl spaces and attics
We inspect with a bore scope camera, treat with mold remediation chemicals, and set up crawl space mold removal or attic mold remediation as needed. Florida-licensed remediators handle the work.
Insurance claim delays and underpayment
We write every scope in Xactimate, photograph all moisture readings and removed materials, and provide a drying report. That documentation gets claims approved faster and at the right amount.
Pricing process
What water damage remediation after fire costs in Palm Bay
$1,800 - $6,500 depending on scope
Square footage affected
The more floor, wall, and ceiling area is wet, the more equipment and time the dry-out takes. A 200-square-foot kitchen is a different job than a 1,200-square-foot whole-house flood.
Water category
Clean water from a burst pipe is category 1. Suppression water with soot and ash is category 2. Sewage backup is category 3 and requires full PPE and antimicrobial treatment, which adds cost.
How long water sat
Water that sits for more than 48 hours wicks higher into walls and feeds mold. That means more demolition, more drying time, and sometimes mold remediation on top of the dry-out.
How much does water damage remediation after fire cost in Palm Bay FL?
Most fire water remediation jobs in Palm Bay run $1,800 to $6,500 in 2026, depending on square footage, water category, and how long the water sat. A single-room kitchen fire with 200 square feet of wet floor might be $1,800 to $2,800. A full suppression flood affecting 1,200 square feet with sewage backup can reach $6,500 or more. We provide a written scope before work begins.
Who does fire water damage restoration near me in Palm Bay?
CrimsonNest handles fire water damage restoration in Palm Bay and across Brevard County. We are based locally, dispatch from Palm Bay, and typically arrive within 60 to 90 minutes. Our technicians hold IICRC WRT and ASD certifications, and we work directly with your insurance adjuster using Xactimate scopes. Call (321) 768-3296 for same-day service.
How long does water damage remediation after fire take in Palm Bay Florida?
Extraction takes two to four hours. Structural drying typically runs three to five days in Palm Bay, depending on humidity and how long the water sat before we arrived. We check moisture readings every 24 hours and give you a drying report when wood returns to 10% to 12% moisture content. Rebuild scheduling starts after that.
Does insurance cover water damage remediation after fire in Palm Bay?
Yes, most Florida homeowner policies cover fire suppression water damage as part of the fire claim. We document every moisture reading, photograph removed materials, and write the scope in Xactimate so your adjuster can process it quickly. We bill carriers directly when coverage applies and walk you through your out-of-pocket before we start.
Related services
Related Services
Flood restoration services
When fire suppression water spreads beyond the fire room, flood restoration services handle the wider dry-out. We extract, dry, and document every affected zone in your Palm Bay home.
Emergency water removal
Standing water after a fire needs to come out fast. Our emergency water removal crews pull hundreds of gallons in the first pass, then set drying equipment the same day.
Mold remediation after water damage
Fire water plus Florida humidity equals mold risk. We apply antimicrobial solution and, if growth appears, handle full mold remediation after water damage with Florida-licensed remediators.Ready when you are
Need water damage remediation after fire Palm Bay FL now?
Call (321) 768-3296 and we will dispatch a crew today. We are licensed, insured, and IICRC certified, and we bill insurance directly when coverage applies. Fire water does not wait, and neither do we.
Talk with the local team
Request Water damage remediation after fire
Call us anytime at (321) 768-3296 for emergency water damage restoration in Palm Bay. We answer the phone 24/7, including holidays. You can also email us at [email protected] or stop by our office during business hours. We serve all of Palm Bay and Brevard County.